Red Ironbark is a lustrous, deep rouge red carried by a dramatic cathedral grain pattern. The texture is moderately coarse but even, with the grain interlocked. There is nothing subtle about it, and it has been an icon species in Australian building for a century and a half.
At 1130kg/m³ it is the densest timber we supply, and among the hardest hardwood floors available anywhere in the world. It grows in the drier country of northern NSW and eastern Queensland. Supplied unfinished.
Solid boards, top to bottom - no laminate, no printed veneer.
Sourced straight from the mill, so you skip the retail markup.
From sustainably managed forests.
Solid
Solid Hardwood
80 - 180mm
Direct Stick, Plank on Ply, Battens
14.0 kN
Random pack lengths, 900 - 4500mm (overlay 600 - 3,000mm)
On site Sand & Finish
12 - 19mm (with 4mm Wear Layer)
Red Ironbark
The questions we hear most often at the showroom. Don’t see yours? Call (08) 9204 2611 or come visit us at 12 Burgay Court, Osborne Park.
Yes. Red Ironbark rates 14.0 kN on the Janka hardness scale, which is the number to look at for dents and traffic. It runs about 1130kg/m³ dry density. No timber floor is dent-proof, but this one takes a busy kitchen. What matters more is that it can be re-coated when the finish is due, rather than replaced.
We don’t, and that’s deliberate. We supply the floor and match you with an installer through our Trade-Match service, chosen for your suburb, your subfloor and the format you’ve picked. You deal with the installer directly, and we stay involved on the product side for the life of the floor.
We stock Select / Standard (Medium Feature) / Feature (High Feature). Grade is about how much natural feature you want to see, not about quality – every grade is structurally sound. Select is the quietest, with small and few features. The higher grades carry more gum vein, more colour movement and more character. Come and see the boards side by side at Osborne Park.
Talk to us before you specify it. Whether a floor suits a heated slab depends on the board thickness, the format and the system itself, and the answer differs by supplier. We’ll check the manufacturer’s position for your build rather than give you a general rule that might not hold.
This floor is supplied unfinished, so allow for sanding and coating on site after it’s laid. That’s usually several days of curing on top of the installation itself. The upside is a seamless finish and a colour chosen to match the rest of your home.
"*" indicates required fields
